List of selectable functions
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 Volkswagen Golf, 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2005 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
| Reference | ||
| 01 - | Check control module version. Refer to Performing On Board Diagnostic (OBD) | On Board Diagnostic (OBD) |
| 02 - | Check Diagnostic Code (DTC) memory | Diagnostic Trouble Code (DTC) memory, checking |
| 04 - | Initiate basic setting | Basic setting, initiating |
| 05 - | Erase DTC memory | Diagnostic Trouble Code (DTC) memory, erasing |
| 06 - | End output | |
| 08 - | Read measured value block | Measured value block, reading |
Further functions, which can be printed out by pressing the HELP key, need not be considered.
After checking a function the V.A.G 1551 returns to the following start position:
Indicated on display
| Rapid data transfer HELP Select function XX |