LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (6 SPD. Manual Transmission 02Y All Wheel Drive) >> 39F - Final drive, front differential >> Shaft and head bevel gear (gear set), adjusting >> Head bevel gear, adjusting >> Determining thickness of adjustment shim S 1* >> Example:

Determining thickness of adjustment shim S 1*: Example:

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Total shim thickness "S total " 2.70 mm
Inserted shim(s) S 2 -1.75 mm
Thickness of adjustment shim S 1 = 0.95 mm
NOTE:
  • Allocate adjustment shims via Electronic Parts Catalog (ETKA).

For available adjustment shims for S 1 , check table and.

scientia non olet · About LEMON Manuals