Installed position of input shaft and output shafts (pinion shafts) in transmission up to transmission manufacture date 180503

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installed Position Of Input Shaft And Output Shafts In Transmission (Up To Manufacture Date 180503)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Output shaft for 5th/6th and reverse gear

2 - Input shaft

3 - Output shaft for 1st to 4th gear

4 - Differential