Pulling Off Tapered Roller Bearing Inner Race

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pulling Off Tapered Roller Bearing Inner Race

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove securing clip.
Before mounting puller, position press piece VW 431 in output shaft and set thrust plate 40-105 on it.

Fig 1: Pulling Off Tapered Roller Bearing Inner Race

Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Separating device 22 to 115 mm, e.g. Kukko 17/2