Needle lift sensor G80 , checking: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
The needle lift sensor signal is used to determine the start of injection. If it fails the start of injection switches to open-loop control (using engine speed and engine load). During normal operation the start of injection is controlled by a closed-loop function (using engine speed, engine load and engine coolant temperature).
NOTE:
- The gold-plated contacts must be used to repair terminals in the connector for the needle lift sensor G80.
Special tools, testers and auxiliary items required
- Test box VAG1598/31
- Hand multimeter VAG1526A or Multimeter VAG1715
- Adapter set VAG1594
- Wiring diagram