Start of injection, dynamically checking and adjusting: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Dynamically checking and adjusting start of injection is only possible in function 04 "Engine basic setting".
The start of injection must always be checked after replacing the toothed belt or loosening the injection pump bolts or toothed belt sprockets and adjusted if necessary.

Special tools, testers and auxiliary items required

Fig 1: Torque Wrench V.A.G. 1331 (5 To 50 Nm)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Torque wrench 5 to 50 Nm VAG1331
Scan Tool (ST) VAG1551 (or Scan Tool (ST) VAG1552 ) with cable VAG1551/3 or cable VAG1551/1

Checking and adjustment conditions

Mechanical engine basic setting OK.
Toothed belt tension OK.