Work sequence
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Connect Scan Tool (ST) VAG1551 /( VAG1552 ). With engine idling select Engine Control Module (ECM) with "Address word" 01 (Connecting Scan Tool (ST) and selecting ECM → Scan Tool VAG1551 , connecting .
Indicated on display:
| Rapid data transfer HELP Select function XX |
- Operate Scan Tool (ST) and advance through program sequence by following display.
- Press buttons 0 and 3 for "Output Diagnostic Test Mode" (DTM).
Indicated on display:
| Rapid data transfer Q 03 Output Diagnostic Test Mode (DTM) |