Radiator and coolant fan, removing and installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- Remove center, left and right insulation trays: → 50 BODY, FRONT
- Disconnect connectors from thermal switch and coolant fan.
- Remove front bumper: → 63 BUMPER
- Bring lock carrier into service position: → 50 BODY, FRONT
- Drain coolant → Cooling system, draining and filling .
- Pull out upper coolant hose retaining clip - arrow - and remove coolant hose from radiator quick release coupling.
Models with air conditioning:
- Observe additional information and removal work.
- Remove radiator securing bolts from side of radiator and take radiator with fans out downward.