Aligning engine and transmission mountings

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Engine Support Bridge 10 - 222 A

GW00000013

Courtesy of VOLKSWAGEN UNITED STATES, INC.

/ 1 Support / 2 Special hook / 3 Adapter / 4 Adapter / 5 Adapter /11 Spindle /21 Guide rail VAG10-222A/

CAUTION: Before loosening bolts, secure assembly using support device 10-222A.

Fig 2: Engine Mount Dimensions

GW00000014

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine mounting

a = 14.0 mm

b = at least 10.0 mm

Both bolt heads - 1 - must be flush with edge - c -.

Fig 3: Transmission Mount Dimensions

GW00000431

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission assembly mounting

Edges - a - and - b - must be parallel to each other.

NOTE:

Torque settings for assembly mountings → Assembly mounting .