Leak detection pump (LDP) components, assembly overview

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Leak Detection Pump Components, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Bolt

2 - Bracket

For leak detection pump (LDP) V144

3 - 15 Nm

4 - Leak detection pump (LDP) V144

Removing and installing, refer to Leak detection pump and EVAP canister, removing and installing

5 - Connector

Black, 3pin
For leak detection pump (LDP) V144

6 - To Evaporative emission (EVAP) canister purge regulator valve N80

Is connected

7 - Vent line

For fuel tank
Ensure seated tightly

8 - Filter housing

9 - Cover

Clipped onto the filter housing

10 - Filter element

For Leak detection pump (LDP) V144