LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (3.2L VR6 4V Engine Mechanical, Fuel Injection Ignition, Engine Code(S): BJS) >> 15 - Engine - Cylinder head, Valvetrain >> Valvetrain, servicing >> Valve stem seals, replacing >> Installing >> Camshafts, checking axial clearance

Camshafts, checking axial clearance

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Camshafts Axial Clearance
GW00000501Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required 

Test sequence 

Perform measurements with support elements and roller rocker levers removed.

Center bearing cap of respective camshaft installed.

Wear limit: max. 0.10 mm

scientia non olet · About LEMON Manuals