LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 26 - Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Exhaust system components, removing and installing

Exhaust system components, removing and installing

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removing and installing exhaust manifold. Refer to Turbocharger with attachments, removing and installing  , Removing and installing turbocharger with attachments.
  • After working on the exhaust system ensure that the system is not under stress and that it has sufficient clearance from the bodywork. If necessary, loosen double clamps and align muffler and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded.
  • Replace self-locking nuts.
scientia non olet · About LEMON Manuals