LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 21 - Turbocharger, G-Charger >> Charge air system with turbocharger >> Charge air cooling components, removing and installing >> Notes

Charge air cooling components, removing and installing: Notes

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Observe safety precautions. Refer toSafety precautions  .

Observe rules for cleanliness. Refer to Rules for cleanliness  .

NOTE:
  • All hose connections secured by clips.
  • The charge air system must be free of leaks.
  • Do not install hose connections with lubricant containing oil.
  • For assembly use lubricating agent (water without additive) if necessary. Do not use lubricating agents containing oil.
  • When repairing remove oil from connections and hose ends.
scientia non olet · About LEMON Manuals