Identifying Camshaft Clearance
WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Checking camshaft axial clearance
Special tools, testers and auxiliary items required
- Universal dial gauge bracket VW 387
- Dial gauge
Work sequence
Check with lifters removed and with first, third and last bearing caps installed.
Wear limit: max. 0.15 mm