Drive plate, removing and installing: Removing
WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Secure counterhold VW 558 to drive plate with M8x45 hex bolt. Place two M10 hex nuts between counterhold tool and drive plate.
Installed position of counterhold: A - To loosen
- Loosen drive plate bolts.
- Remove counterhold tool, remove bolts and drive plate