Part II: Notes

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Engine Assembly - Part II

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Poly V-belt

Mark direction of rotation before removing
Check for wear
Do not kink
Removing and installing. Refer to Poly V-belt, removing and installing

2 - 10 Nm plus an additional 14 turn (90 ° )

3 - Belt pulley/vibration damper

Can only be installed in one position. Holes are off-set.

4 - 25 Nm

5 - Tensioning element for poly V-belt

Turn with open end wrench to relieve tension on poly V-belt. Refer to Poly V-belt, removing and installing

6 - Generator

7 - Compact bracket

For Generator, power steering pump and air conditioning compressor

8 - 45 Nm

9 - Banjo bolt, 30 Nm

10 - Seal

Replace

11 - Pressure line

12 - Power steering pump

Removing and installing: Refer to 48 STEERING .

13 - Belt pulley

For power steering pump