Electronic Power Control (EPC) system

Fig 1: Electronic Power Control Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Mounting 

• Removing and installing:

Refer to BRAKE PEDAL - ASSEMBLY OVERVIEW

2 - Connector 

• Black, 6-pin

3 - 10 Nm 

4 - Throttle Position (TP) sensor -G79- and Sender 2 for accelerator pedal position -G185- 

• In vehicles with an automatic transmission kick down switch point must be learned again when sensor is replaced. Refer to Adapting components and functions  .
• When removing remove cover under instrument panel

5 - Bracket 

• For footwell cover
• Clipped onto accelerator pedal