LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform) >> 15 Engine - Cylinder head, Valvetrain >> Valve gear, servicing >> Assembly overview >> Reworking cylinder head sealing surface

Reworking cylinder head sealing surface

Fig 1: Reworking cylinder head sealing surface
GW00000100Courtesy of VOLKSWAGEN UNITED STATES, INC.

Cylinder head reworking dimension:

a = At least 132.6 mm

NOTE: When the sealing surface has been reworked, the valves must be set deeper by the same amount.
scientia non olet · About LEMON Manuals