LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform) >> 15 Engine - Cylinder head, Valvetrain >> Cylinder head, removing and installing >> Cylinder head, removing and installing >> Overview

Cylinder head, removing and installing: Overview

Checking compression. Refer to Compression pressures, checking 

NOTE:
  • When installing an exchange cylinder head with camshaft, lubricate running contact surfaces between hydraulic lifters and camshaft cam surfaces before installing cylinder head cover.
  • The plastic packing pieces for protecting the open valves must not be removed until immediately before installing the cylinder head.
  • If the cylinder head is replaced, all the coolant in the system must also be replaced.
  • Removing and installing intake manifold. Refer to Intake manifold upper part, removing and installing  
scientia non olet · About LEMON Manuals