Headlights, removing and installing

Removing

CAUTION:

Before beginning repairs on the electrical system:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Remove front bumper

Refer to 63 BUMPER

Fig 1: Identifying Screws & Headlight Trim (Jetta)

GW00004208

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove screws -1-.
Remove headlight trim -2-.
Remove screws -3-.

Fig 2: Identifying Headlight Screws (Jetta)

GW00004209

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove screws -1-.
Disconnect electrical connections.
Pull headlight housing out forward.

Installing

Install in reverse order of removal.

Check and adjust headlight if necessary. Refer to Headlights, adjusting .