Parking Light/Turn Signal (dual filament) bulb, replacing

Removing

CAUTION:

Before beginning repairs on the electrical system:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Fig 1: Releasing Spring Clip (Parking Light/Turn Signal, Jetta)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Release spring clip -arrow- and remove sealing cover.

Fig 2: Turning Bulb Holder (Parking Light/Turn Signal, Jetta)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Turn bulb holder -arrow- to left and pull out of housing.
Remove bulb from the holder.

Installing

CAUTION:

Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.

Install in reverse order of removal.

NOTE: When installing, ensure bulb holder engages in bulb housing.

Install sealing cover.
Check turn signal (bulb) function.