LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> Engine Mechanical >> 2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform) >> 13 Engine - Crankshaft, Cylinder block >> Piston and connecting rod, disassembling and assembling >> Assembly overview >> Installation position of bearing shells

Installation position of bearing shells

Fig 1: Installation Position Of Bearing Shells
GW00000055Courtesy of VOLKSWAGEN UNITED STATES, INC.

Bearing shell -1- with oil channel (arrow) for connecting rod.

Bearing shell -2- without oil channel connecting rod bearing cap.

Dimension -a- must be same on both left and right side. Deviation: 0.2 mm.

scientia non olet · About LEMON Manuals