Protective housing in plenum chamber, removing and installing

Removing 

• Removing windshield wiper system. Refer to Windshield wiper arms, removing and installing  .

Fig 1: Protective Housing Cover At The Retaining Lugs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip protective housing cover at the retaining lugs -arrows- and take out upward.
• Separate connectors and take wiring harnesses out of protective housing.

Fig 2: Protective Housing Securing Nuts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove securing nuts -arrows- and remove protective housing.

Installing 

Install in reverse order of removal.