Rear Lid Handle Unlock Switch -E234- - Jetta, removing and installing

Removing 

• Removing inner rear lid trim

Refer to 70 - INTERIOR TRIM

Fig 1: Identifying Multi-Connectors (Jetta)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip multi-connectors -1- and -2- from retainers and disconnect.

Fig 2: Identifying Rod & Screws (Jetta)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip rod -arrow- from lock cylinder.
• Remove screws -1-.
• Remove lock cylinder upwards.

Fig 3: Identifying Switch & Screws (Jetta)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws -arrows-
• Remove switch upwards.

Installing 

Install in reverse order of removal.