Light Switch -E1-, removing and installing

Removing

CAUTION:

Before beginning repairs on the electrical system:

Fig 1: Pressing Rotary Part Inward, Turning To Right & Pulling Light Switch Out

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Turn rotary switch to "0" position.
Press rotary part inward -arrow1- and turn slightly to right -arrow2-
Hold rotary part in this position and pull light switch out from instrument panel -arrow3-.
Disconnect electrical connection.

Installing

Fig 2: Pressing Rotary Part Inward, Turning To Right & Inserting Into Instrument Panel

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Hold light switch and press rotary part inward -arrow1- and turn slightly to right -arrow2-
Hold rotary part in this position and insert light switch into instrument panel -arrow3-.
Turn rotary part to position "0", release and engage switch