Rear window washer jet, replacing

Removing 

• Switch ignition on and briefly operate rear wiper to bring rear wiper to park position.
• Fold open cover cap -1- and pull off from wiper arm.

Fig 1: Pulling Spray Jet Out

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pull spray jet out carefully in direction of arrow using suitable pliers.

Installing 

• Slide spray jet into wiper arm shaft onto stop with spray jet opening facing horizontally upward.
• Check and adjust spray pattern if necessary. Refer to Rear window washer jets, adjusting  .
• Replace cover cap.