Wiper rubber, removing and installing

Fig 1: Pressing Together Both Steel Strips On Enclosed Side Of Rubber With Pliers

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Using a pair of pliers, press together both steel strips on enclosed side of rubber, slide rubber sideways out of upper clip and remove rubber complete (slide rubber through remaining clips).

Fig 2: Wiper Blade Rubber Retaining Slots

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert new rubber into lower clips of wiper blade.
Insert both strips in the first groove of the rubber so that the recesses in the strips face the rubber and engage in the rubber lugs of the groove.
Using pliers press both steel strips and rubber together and insert in the upper clips so that the lugs of the clips on both sides engage in the retaining slots -arrow- of the wiper blade rubber.