Evaluating display group number 009

Display zone	Description	Display	Corrective action
1	Instrument illumination	mv = 0 to 100% (in 16 steps)	Visual check of wiring Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display If the display does not change when operating, repair malfunction or replace relevant component Erase DTC memory Perform functional check Check DTC memory again
2	Speed signal	mv = km/h (steps: 2km/h)
3	Remote control key button	unlock, lock, RLR1), Panic2) (with 0 or 1)	If necessary adapt radio wave remote control (Function 10, adaptation. Refer to Adaptation )
4	Interior monitor sensor	yes no not installed

1) Only vehicles for USA, RLR= Rear lid remote release

2) Only vehicles for USA, alarm system and turn signal lights are activated