Secondary Air Injection (AIR) system, checking for proper seal

Function test 

• Select the measuring value "Test-ID 03: Secondary Air Injection (AIR) system" and check whether the specified values are being reached. Refer to Diagnostic mode 6: Check test results of components that are not continuously monitored
• End diagnosis and switch ignition off.

If the specified values are not reached:

Checking Proper Seal 

• Check the connection pipes and hoses between Secondary Air Injection (AIR) pump motor and combination valve for proper seal:

• Vehicles with engine code AFP. Refer to Parts of Secondary Air Injection (AIR) system (vehicles with engine code AFP), removing and installing  ,
• Vehicles with engine code BDF. Refer to Parts of Secondary Air Injection (AIR) system (vehicles with engine code BDF), removing and installing  ,
• Vehicles with engine code BJS. Refer to Parts of Secondary Air Injection (AIR) system (vehicles with engine code BJS), removing and installing  .

• Repeat function test.
• Check hoses and hose connections for secure seating.
• Repeat function test.

If malfunction is no longer present:

• Erase DTC memory of Engine Control Module (ECM). Refer to Diagnostic mode 4: Reset/erase diagnostic data
• Generate readiness code. Refer to Readiness code, generating