LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 46 (2.8L & 3.2L - Generic Scan Tool, Engine Code(S): AFP, BDF, BJS [A4 Platform] (20 Fuel Supply - 26 Exhaust System, Emission Controls)) >> 26 Exhaust system, Emission controls >> Secondary Air Injection (AIR) system >> Parts of Secondary Air Injection (AIR) system (vehicles with engine code BJS), removing and installing >> Relay position assignment in protective housing (engine compartment, left)

Relay position assignment in protective housing (engine compartment, left)

WARNING: This page is about a different variant/trim than selected.
Fig 1: Secondary Air Injection Pump Relay J299
GW00000573Courtesy of VOLKSWAGEN UNITED STATES, INC.

Secondary Air Injection (AIR) Pump Relay -J299-* (arrow)

NOTE:
  • Disconnect battery Ground (GND) strap beforehand if tools are necessary for removal of relays or control modules from the relay carrier.
  • Obtain radio code for radios with anti-theft coding before disconnecting battery.
  • Check activation of the Secondary Air Injection (AIR) Pump Relay:

Refer to Electrical Wiring Diagrams, Troubleshooting & Component Locations

scientia non olet · About LEMON Manuals