LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (4 SPD. Automatic Transmission 01M (A4 Platform)) >> 39 Final drive, Differential >> Final drive, disassembling and assembling >> Input gear, removing and installing >> Pressing on tapered roller bearing inner race

Pressing on tapered roller bearing inner race

WARNING: This page is about a different variant/trim than selected.
Fig 1: Pressing On Tapered Roller Bearing Inner Race Using Special Tools VW 407, 40-21 & VW 402
GW00002279Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE: A press piece must be placed below the hub of the input gear to avoid damaging it.
scientia non olet · About LEMON Manuals