LEMON Manuals
: Even more car manuals for everyone
Home
>>
Volkswagen
>>
2001
>>
Jetta GL, 2.0 B
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 43 (4 SPD. Automatic Transmission 01M (A4 Platform))
>>
39 Final drive, Differential
>>
Final drive, disassembling and assembling
>>
Differential, removing and installing
>>
Marking adjusting ring
Marking adjusting ring
WARNING:
This page is about a different variant/trim than selected.
Fig 1: Mark Installed Position On Adjusting Ring
Courtesy of VOLKSWAGEN UNITED STATES, INC.
If used bearings are re-inserted, mark installed position (arrow) and again position on marking when installing.
Courtesy of VOLKSWAGEN UNITED STATES, INC.