LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (4 SPD. Automatic Transmission 01M (A4 Platform)) >> 38 Automatic Transmission - Gears, Hydraulic controls >> Reverse gear clutch -K2-, disassembling and assembling >> Reverse gear clutch -K2-, disassembling and assembling >> Installed position of spring supporting plate, checking circlip

Installed position of spring supporting plate, checking circlip

WARNING: This page is about a different variant/trim than selected.
Fig 1: Installed Position Of Circlip
GW00002248Courtesy of VOLKSWAGEN UNITED STATES, INC.

Circlip (arrow) must be seated in the groove of clutch housing. Spring supporting plate must be centered relative to hub.

scientia non olet · About LEMON Manuals