Overview of test steps

WARNING: This page is about a different variant/trim than selected.

Perform only those test steps recommended in the Diagnostic Trouble Code (DTC) and Measured Value Block tables
Steps listed below according to component

Component checked	Test steps to be performed	Component checked	Test steps to be performed
Supply voltage from TCM -J217-	Perform test step 1	Kick-Down Switch -F8-	Perform test step 10
Brake Light Switch -F-	Perform test step 2	Shift Lock Solenoid -N110-	Perform test step 11
Solenoid valve 1 -N88-	Perform test step 3	Transmission Fluid Temperature Sensor -G93-	Perform test step 12
Solenoid valve 2 -N89-	Perform test step 4	Vehicle Speed Sensor -G68-	Perform test step 13
Solenoid valve 3 -N90	Perform test step 5	Transmission Vehicle Speed Sensor -G38-	Perform test step 14
Solenoid valve 4 -N91-	Perform test step 6	Multi-Function Switch -F125-	Perform test step 15
Solenoid valve 5 -N92-	Perform test step 7
Solenoid valve 6 -N93-	Perform test step 8
Solenoid valve 7 -N94-	Perform test step 9