LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (2.0L - Generic Scan Tool, Engine Code(S): AEG (A4 Platform)) >> ST - Generic Scan Tool >> Diagnostic modes >> Diagnostic Mode 06: Checking test results of components that are not continuously monitored >> Notes

Diagnostic Mode 06: Checking test results of components that are not continuously monitored: Notes

WARNING: This page is about a different variant/trim than selected.

Diagnostic Mode 06 displays the test results of emission related components and systems which are not continuously monitored.

The values of the individual test results must reach the specified value or must be within the min. and max. limits.

Depending on scan tool and protocol used, the information displayed in diagnostic mode 06 may be referred to by different names such as Test-ID (TID), Hex-ID, Component-ID (CID), On-Board Diagnostic Monitor Identifier (OBDMID), or contain no name at all and be referenced by only a number.

scientia non olet · About LEMON Manuals