LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Measuring Value Block >> Measuring value blocks, evaluating display groups 50 to 69 (Speed regulation) >> Display group 55 (Speed regulation) Idling stabilization

Display group 55 (Speed regulation) Idling stabilization

WARNING: This page is about a different variant/trim than selected.
Display group 55 (Speed regulation) Idling stabilization
  • Engine running at idling speed
Read Measuring Value Block 55 Indicated on display    
xxxx RPM xx.xx% xx.xx% xxxxx      
1 2 3 4 Display zones Specification Evaluation
        Operating mode xxxxx  
      Idling regulator learning value Air conditioner on (A/C High) Air conditioner off (A/C Low) -6.0 to 6.0% -3.0 to 3.0% ---
    Idling regulator -4.30 to 12.20% ---
  Engine speed (idling speed): Manual transmission Automatic transmission 700 to 820 RPM 640 to 760 RPM  
NOTE:
  • For display zone 3:
  • Displayed is the amount that the idling speed stabilization has moved away from the prescribed average. For a new engine the values lie in the positive range, because of the higher friction and in the negative range with an engine that has run-in.