Display group 114 (Charge pressure control)
WARNING: This page is about a different variant/trim than selected.
| Display group 114 (Charge pressure control) | ||||||
|
||||||
| Read Measuring Value Block 114 | → | Indicated on display | ||||
| xxx.x% | xxx.x% | xxx.x% | xxx.x% | |||
| 1 | 2 | 3 | 4 | Display zones | Specification | Evaluation |
| Wastegate bypass regulator valve duty cycle | 0 to 100% | --- | ||||
| Engine load | 10 to 150% | --- | ||||
| Specified engine load after correction (reduced via knock control, altitude adaptation and coolant temperature) | max. 150% | --- | ||||
| Specified engine load (mapped value via accelerator pedal position) | max. 150% | --- | ||||