Display group 23 (Ignition) Knock control
WARNING: This page is about a different variant/trim than selected.
| Display group 23 (Ignition) Knock control | ||||||
|
||||||
| Read Measuring Value Block 23 | → | Indicated on display | ||||
| xxxx RPM | x.xx% | xx.x ° CA | xx.x ° CA | |||
| 1 | 2 | 3 | 4 | Display zones | Specification | Evaluation |
| No. 4 Cyl. retardation of ignition timing by knock control | 0 to 12.75 ° CA | |||||
| No. 3 Cyl. retardation of ignition timing by knock control | 0 to 12.75 ° CA | |||||
| Engine load | 10 to 150% | --- | ||||
| Engine speed (idling speed) Manual transmission Automatic transmission | 700 to 6800 RPM 640 to 6800 RPM | |||||
NOTE:
- For display zones 3 and 4:
- The displayed value should be 0.0 ° Crankshaft Angle (CA) at idling.