Display group 10 (Ignition)
WARNING: This page is about a different variant/trim than selected.
| Display group 10 (Ignition) | ||||||
|
||||||
| Read Measuring Value Block 10 | → | Indicated on display | ||||
| xxxx RPM | xxx% | x.x% | xx.x ° BTDC | |||
| 1 | 2 | 3 | 4 | Display zones | Specification | Evaluation |
| Ignition angle Engine code AWW Engine code AWP | 5 to 15 [degrees] BTDC 4 to 15 [degrees] BTDC | --- | ||||
| Throttle valve angle potentiometer 1 G187 | 0.3 to 4.0% | |||||
| Engine load | 10 to 25% | |||||
| Engine speed (idling speed): Manual transmission Automatic transmission | 700 to 820 RPM 640 to 760 RPM | |||||
NOTE:
- For display zone 2:
- Engine load at idle is given as the specified value.
- For display zone 3:
- Display values must be approx. 100% when accelerator pedal is fully depressed.