Evaluating display group 1, display zone 1 - Engine speed (idling speed)

WARNING: This page is about a different variant/trim than selected.

Appears on display	Possible cause	Corrective action
Less than 640 RPM or 700 RPM	Throttle valve control module sticking or faulty	Check throttle valve control module → Throttle valve control module, checking
		Perform idling check → Idling check
More than 760 RPM or 820 RPM	Idling switch not closed/faulty	Check DTC Memory → DTC memory (functions 02 and 05), checking and erasing
	Large amount of unmetered air (cannot be compensated for by the idling stabilization)	Check intake air system for leaks → Intake air system (unmetered air), checking for leaks
	Throttle valve control module sticking/faulty	Check throttle valve control module → Throttle valve control module, checking
		Perform idling check → Idling check