LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (2.8L - Engine Mechanical - AFP (A4 Platform)) >> 26 - Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Muffler with hangers >> Rear muffler, installing free of stress

Rear muffler, installing free of stress

WARNING: This page is about a different variant/trim than selected.
Fig 1: Installing Muffler Free Of Tension
GW00000275Courtesy of VOLKSWAGEN UNITED STATES, INC.

The bolts at exhaust pipe must be parallel to tubular bridge (dimension - X  - same on left and right).