LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (2.8L - Engine Mechanical - AFP (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Valve timing, setting (Installing timing chains) >> Locking vibration damper in position

Locking vibration damper in position

WARNING: This page is about a different variant/trim than selected.
Fig 1: Vibration Damper Locked In Position With Counter Hold 3406
GW00000804Courtesy of VOLKSWAGEN UNITED STATES, INC.

To loosen and tighten the mounting bolt, lock vibration damper in position with counter hold 3406.

NOTE:
  • The mounting bolt for the vibration damper must be replaced.
scientia non olet · About LEMON Manuals