Front fender, removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Remove radiator grille, bumper and wheel housing liner.
If applicable, remove radio antenna from fender.
Remove hex bolts -1-.
Remove hex bolts -2- and bolts -3-.
Heat fender in area of A-pillar with hot air blower and remove fender.
CAUTION: Heat PVC slightly and for a short time only. Do not discolor PVC or blister paint.

NOTE: If necessary, cut through PVC with an upholstery knife - this requires help from a second technician.

Fig 1: Removing Front Fender