Adjustment Overview

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If transmission repairs have been performed, it is only necessary to adjust the input shaft, output shaft for 1st-4th gear, output shaft 5th, 6th and reverse gear or differential if components have been replaced which have a direct effect on the adjustment of the transmission. Refer to the following table to avoid unnecessary adjustment:

		To be adjusted:
		Input shaft Refer to Input shaft, adjusting	Output shaft 1st-4th gear Refer to Output shaft, adjusting	Output shaft 5th, 6th and reverse gear Refer to Output shaft for 5th, 6th and reverse gear, adjusting	Differential Refer to Differential, adjusting
Replaced part:	Transmission housing	x	x	x	x
	Clutch housing	x	x	x	x
	Input shaft	x
	Output shaft for 1st-4th gear		x
	Output shaft 5th, 6th and reverse gear			x
	Differential housing				x
	Input shaft tapered roller bearing	x
	Output shaft 1st-4th gear tapered roller bearing		x
	Output shaft 5th, 6th and reverse gear tapered roller bearing			x
	Differential tapered roller bearing				x