LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (2.8L - Engine Mechanical, Engine Code: BDF) >> 26 - Exhaust System, Emission Controls >> Exhaust system components, servicing >> Significance of Malfunction Indicator Lamp (MIL) for exhaust emissions

Significance of Malfunction Indicator Lamp (MIL) for exhaust emissions

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

If the engine control module detects a malfunction it switches on the Malfunction Indicator Lamp (MIL).

Fig 1: Locating MIL For Exhaust Emissions
GW00000939Courtesy of VOLKSWAGEN UNITED STATES, INC.

Location MIL

NOTE:
  • The MIL can switch on in the continuous or flashing mode. Check the DTC memory in every case: โ†’ 01 ON BOARD DIAGNOSTIC (OBD)
  • Flashing mode: There is a malfunction present which can damage the catalytic converter when continuing to drive at this power output. If this occurs, continue driving only at reduced output.
  • Continuous mode: There is a malfunction present which causes the emissions to deteriorate. Check the Motronic engine control module and/or transmission control module.
  • Check the DTC memory if the customer has a complaint or if there is a driving characteristic problem and the MIL does not light up. This is because malfunctions can be stored which will not switch on the MIL immediately.