LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (2.8L - Engine Mechanical, Engine Code: BDF) >> 13 - Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Engine, disassembling and assembling >> Part II >> To loosen and tighten securing bolt, hold vibration damper with Counter support T10069

To loosen and tighten securing bolt, hold vibration damper with Counter support T10069

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Loosening/Tightening Securing Bolt, Using Counter-Holder T10069 To Hold Vibration Damper
GW00000436Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • Vibration damper securing bolt must be replaced.
  • Tighten securing bolt with Torque wrench (150...800 Nm) VAG 1601.
scientia non olet · About LEMON Manuals