LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (3.2L VR6 4V Engine Mechanical, Fuel Injection Ignition, Engine Code(S): BJS) >> 17 - Engine - Lubrication >> Lubrication system components, removing and installing >> Assembly overview >> Oil spray jet, removing and installing

Oil spray jet, removing and installing

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required 

NOTE:
  • Oil spray jets are built into the crankshaft bearings 2 to 7.

Removing 

Fig 1: Identifying Oil Spray Jet Application Area
GW00000508Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing 

scientia non olet · About LEMON Manuals