Valve stem seals, replacing: Installing: Notes

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Plastic Sleeve, Valve Stem Seal And Valve Stem Seal Driver 3365

Courtesy of VOLKSWAGEN UNITED STATES, INC.

To prevent damage to new valve stem seals, place plastic sleeve - A - on valve stem.
Lubricate sealing lip of valve stem seal - B -, insert in valve stem seal driver 3365, and carefully push onto valve guide.
Installing camshafts: Refer to Camshafts, removing and installing .