LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 20 - Fuel supply >> Components of fuel supply system, removing and installing >> Fuel delivery unit, removing and installing >> Installing

Fuel delivery unit, removing and installing: Installing

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Installation of the fuel delivery unit is performed in the reverse order.

NOTE:
  • Do not bend the fuel sender when installing.
  • Insert seal for flange or fuel delivery unit dry into opening of fuel tank.
  • Moisten seal with fuel only when installing flange or fuel delivery unit.
  • Ensure fuel hoses are tight.
  • After installing fuel delivery unit, check that the supply, return and breather lines are still clipped onto the fuel tank.
Fig 1: Installed Position Of Flange Of Fuel Delivery Unit
GW00000163Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • Note installed position of fuel delivery unit flange: Marking on flange must align with the marking on fuel tank - arrows  -.
scientia non olet · About LEMON Manuals