Tightening sequence for compact bracket to cylinder block

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tightening Sequence For Compact Bracket To Cylinder Block

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Work sequence

Position compact bracket on cylinder block (observe dowel sleeve between compact bracket and cylinder block).
Tighten compact bracket as shown in following tightening sequence:

Tighten bolt A , 45 Nm
Tighten bolt B , 45 Nm
Tighten bolt C , 45 Nm
Tighten bolt D , 45 Nm
Tighten bolt E , 45 Nm
Tighten bolt F , 45 Nm